Weld-On Plastic Solvent Adhesives - Click to enlarge

Quantity Discounts! Save 33% by the Case Call us for shipping you Gallons by the Case

Click here to buy Weld-On Plastic Glue and Adhesives

Download a Weld-On Plastic Glue Guide PDF here

From the IPS Weld-On Website:
IPS leads the adhesives industry with the most complete line of solvent cements and adhesives for bonding plastics. You can count on consistent, high-quality WELD-ONŽ adhesives, such as 4, 10, 16, 40, 55, 66 and 4052.

Since 1955, IPS has been known worldwide for developing and manufacturing quality Weld-On adhesives and cements for joining plastics and other materials. In fact, IPS was the first to produce a reliable cement for use with PVC and ABS pipe and fittings.

Today, this commitment to innovation continues along with the assurance of receiving the highest quality adhesives.

That's why we use state-of-the-art equipment, such as a gas chromatograph, FTIR spectrophotometer, colorimeter, bond strength tester and viscometer to check everything from the raw materials to the final product.

IPS Weld-On Adhesives are available in ALL sizes. Tubes as small as 1.5oz, 4oz cans, Pints, Quarts, & Gallons are all available - quickly!

Ridout Plastics Quick Guide to IPS Weld-On Adhesives

Weld-On #3
Fastest Setting. Water-Thin. Fast evaporation. Will leave markoff if spilled. Acrylic to Acrylic. Polycarbonate to Polycarbonate. Not for beginners.

Weld-On #4
Fast Setting. Water-Thin. Fast evaporation. Acrylic to Acrylic. Polycarbonate to Polycarbonate. Best for most applications of these materials.

Weld-On #16
Fast Setting. Syrupy in consistency. Skins over fast but slower setting. Will leave a mess if spilled. Acrylic to Acrylic. Polycarbonate to Polycarbonate. ABS to Acrylic. Multi-purpose. Good for sealing tiny gaps and water-proofing small tanks.

Weld-On #10
2 part adhesive - see IPS chart on this page. High strength. For bonding dissimilar materials. Not clear.

Weld-On #40
2 part CLEAR adhesive - see IPS chart on this page. Highest strength adhesive for acrylics. This is used in making large aquariums, tanks, and glueing thick pieces of Plexiglas. It cures perfectly clear. Removing bubbles after mixing requires patience and practice.

Disclaimer
Ridout Plastics provides this information as a reference only not an implied or express fitness of use. As with most chemicals, YOU must experiment with your materials and the adhesives for fitness of use. Many factors can affect the results you achieve, including, but not limited to the ambient air temperature, humidity, cleanliness of bond area, and quality of preparation of bonded edges.

Plexiglass, Lexan, UHMW, ABS, PTFE, KYDEX, Polyester Film, Plastic Sheet Experts

Plexiglas^® sheet is a registered trademark of Arkema, Inc. Ridout Plastics is an authorized distributor of Plexiglas^® acrylic sheet. Plexiglas^® is commonly mis-spelled as Plexiglass, Plexy Glass, & Plexi Glass.

September 2011
Don't see it here? Need Larger Sheets?
Order Plexiglass, Acrylic Sheet, Lexan, Polyester Film, UHMW
Visit our new full e-commerce website, www.ePlastics.com

Quick Links for the RPlastics Plastics Store
| Plastic Display Ice | Plastic Drinkware | Plastic Sheets | Plexiglass Acrylic Sheets | Lexan Polycarbonate Sheets |
| Weld-On Plastic Adhesive | Clear Plexiglass Podium | Plastic Furniture | Plastic Polish | Plastic Tools | Plastic Library |
| Plastic Links | Buy Larger Plexiglass and Plastics at ePlastics | Brochure Holders | Site Map | Contact RPlastics |

All On-Line Orders using your credit card are encrypted and safe.
We are the Top-Rated Site at Yahoo.
secure ecommerce provided by Yahoo!

Secure Web Transactions

Search our Site for Answers!