| | 
Plastic Sheet Shapes Fabrication > Plastic Tools & Access. > Plastic Drill Bits > 3/16" Plexiglass Acrylic & Lexan Drill Bit
 3/16" Plexiglass Acrylic & Lexan Drill Bit3/16" Plastic Drill Bit
It takes a special drill bit to properly drill through Plexiglas, Lucite, Acrylite, or Perspex acrylic sheet. Ideal for Lexan, Tuffak or Makrolon polycarbonate sheet. Special 60 degree angle. Not recommended for wood or metal.
NON-CHIPPING!
These are specially ground flukes with a 90° point for drilling holes in acrylic plastics including, Plexiglas®, Lucite® and Acrylite® materials.
Metal drill bits will not work as they are made to bite into the metal as they are pushed into it. If they are used on acrylics they will chip and cause other damage to the plastic.
When drilling holes for screws, you must make the hole larger than the screw itself to allow for expansion and contraction of the material. If not you will cause stress cracks at the hole and they will spread!
|
Plexiglass, Lexan, UHMW, ABS, KYDEX, Mylar®, Plastic Sheet Experts
Plexiglas® is a registered trademark of Arkema, Inc. Ridout Plastics is an authorized distributor of Plexiglas® acrylic sheet. Plexiglas® is commonly mis-spelled as Plexiglass, Plexy Glass, & Plexi Glass. Mylar® is a registered trademark of DuPont for their brand of clear polyester film and is available by request.
March 2010
Don't see it here? Need Larger Sheets?
Order Plexiglass, Acrylic Sheet, Lexan, Mylar, UHMW
Visit our new full e-commerce website, www.ePlastics.com
Quick Links for the RPlastics Plastics Store
| Plastic Display Ice |
Plastic Drinkware |
Plastic Sheets |
Plexiglass Acrylic Sheets |
Lexan Polycarbonate Sheets |
| Weld-On Plastic Adhesive |
Plexiglass Podium |
Plastic Furniture |
Plastic Polish |
Plastic Tools |
Plastic Library |
| Plastic Links |
Buy Larger Plexiglass and Plastics at ePlastics
| Brochure Holders |
Site Map |
Contact RPlastics |
All On-Line Orders using your credit card are encrypted and safe.
We are the Top-Rated Site at Yahoo.
Secure Web Transactions
Search our Site for Answers!
If you don't see it here - call us now!
All Government & Major Credit Cards Accepted / Prices subject to change without notice
Ph 858-560-1551 / Fax 858-560-1941
© Copyright 1994-2010 Ridout Plastics Co. Inc. / All Rights Reserved
.
|
|